-
Zirconium Pump
Specifications Performance Scope Flow: Q=5~2500m3/h Head: H≤300m Operating pressure: P=1.6~2.5~5~10Mpa Operating temperature: T=-80~+450℃ Design according to API610 11th standard for horizontal single-stage, single-suction, radial sectioning, Center-line -supported-installation, cantilever centrifugal pump. Remote temperature and vibration sensors installed at the bearing can monitor pump operation remotely. Application: Acetic acid, formic acid, MMA and other industries. -
ZAZE Petro-chemical Process Pump-1
Overview We, in accordance with the design and manufacture standard of API61011th Centrifugal Pump for Petroleum, Petrochemical and Natural Gas Sectors, develop ZA/ZE series petro-chemical process pumps. Main pump body, according to the form of support, is divided into two structures: OH1 and OH2, and the impeller are of open and closed structures. Of which, ZA belong to OH1, closed impeller; and ZAO is of OH1, an open one; ZE is of OH2, with a closed one, and ZE0 is of OH2, w... -
KC Special-material Magnetic Pump
Specifications Performance Scope Flow: Q=1~1000m3/h Head: H=3~250m Operating pressure: P≤2.5Mpa Operating temperature: T=-120~+350℃ For KC series single-stage leakless special-material magnetic pump，the standards of API685 edition 2 and ISO2858 End-suction Centrifugal Pumps shall be performed. It is characterized with low noise, no leakage and no pollution, because of the shaftless sealing design，completely avoiding the defects of traditional mechanical shaft sealing causing... -
2122 EN593 Center Line Butterfly Valve
Specifications Specification Meet or exceed the requirements of EN593. Centerline type. Rubber seat liner bonded on the body. Splined drive. Mounting flange in accordance with ISO 5211. Flange and drilling comply with EN1092 PN10/16. Operated with gear operator. Options BUNA-N bonded body seat. Material Specifications Body ductile iron Seat rubber Shaft stainless steel Disc ductile iron -
2102 AWWA C504 Center Line Butterfly Valve
Specifications Meet or exceed the requirements of AWWA C504. Rubber seats bonded to the body. Robust design. Mounting flange in accordance with MSS SP-102 or ISO 5211. Flange and drilling comply with ASME B16.1 Class 125. Mechanical-joint ends complied with ANSVAWWAC111/A21.11. Options Meet or exceed the requirements of AWWA C504. Rubber seats bonded to the body. Robust design. Mounting flange in accordance with MSS SP-102 or ISO 5211. Flange and drilling compl... -
1319 Ductile Iron Pressure Relief Valve
Specifications Relief valve: Limits inlet pressure by relieving excess pressure. Pressure sustaining: Prevents inlet pressure from dropping below a predetermined minimum. Operates over a wide flow range. Inlet pressure is adjustable with single screw. Quick opening and adjustable closing speed. Can be maintained without removal from the pipe line. Flanged and drilling complies with EN1092-2 PN10/16; ANSI B16.1 Class125. Groove end complies with AWWA C606 Standard. Corrosion Protection Fus... -
SY Series Drain Valve
Performance Parameters Nominal Diameter 3/4 “~4” Nominal pressure ANSI 150LB-4500LB Body type Y pattern of 45-degree angle Body material A105, F22, F91, F92, F316H Bonnet standard, cooling structure Trim integral stellate seat Packing Flexible graphite with stainless steel wire Flow characteristics quick opening Two kinds of actuators are optional pneumatic diaphragm actuator (pneumatic multi-spring and single-spring diaphragm actuator are optiona... -
MA Series Sliding-Stem Control Valve
Detail Size range DN25~DN400 Pressure rating range 150Ib,300Ib,600Ib Body material various materials available, such as WCB, WC6, WC9, CF8M, CF8, CF3M, CF3, etc. Flow Characteristic quick opening, linear or equal percentage Advantages 1)Valve Plug Stability Rugged guide cylinder provides excellent plug stability, which reduces vibration and mechanical noise; 2)More Flow Capacity Streamlined flow channel ensures low flow resistance and exce... -
Spring type safety valve
Detail Type Safety Valve Model A68Y-P54110V, A68Y-P54140V, A68Y-P54200V, A68Y-P5432V, A68Y-P5445V, A68Y-P5464V Nominal Diameter DN 40-150 It is applicable for steam, air and other medium equipment or pipeline (working temperature ≤560℃ and working pressure ≤20MPa) as an overpressure protector. Advantages With spring full-discharge structure design, the valve has large discharge coefficient, simple structure, good sealing performance, accurate open... -
Parallel Slide Valve for steam-water system
Detail Type Gate Valve Model Z964Y Pressure PN20-50MPa 1500LB-2500LB Nominal Diameter DN 300-500 It is used as opening and closing devices for pumping system or other high and medium pressure pipe systems of 600 to 1,000MW supercritical (ultra-supercritical) unit steam turbine. Advantages 1.It adopts pressure self-sealing structure, with welded connection at both ends. 2.It adopts electric bypass valve at inlet and outlet for balancing differential pressure at inlet and ou... -
AT Series Pneumatic Actuator
Detail Operating medium: Dry or lubricated air, the non-corrosive gases or oil 2. Air supply pressure: Double acting: 2~8Bar; Spring return: 2~8Bar 3. Operation temperature: Standard (-20℃ ~ 80℃) Low temperature (Down to -40℃) High temperature (Up to 150℃) 4. Travel adjustment: Have adjustment range of ±4°for the rotation at 90° 5. Lubrication: All the moving parts are coated with lubricants, extending their service life 6. Application: Either indoor or outdoor 7. Max Working Pressure: less... -
DRG Series Heavy-Duty Pneumatic Actuator
Detail 1. DRG spring return actuator can provide 120000 n. m torque output, DNG double acting actuator can provide 240000 n. m torque output. The maximum working pressure is 8 bar. 2. Two independent travel adjustment bolts, can be in the range of ±6℃ to regulate valve switch position. 3. Working temperature: Standard (-20℃ ~ 80℃) Low temperature (Down to -40℃) High temperature (Up to 150℃) 4. Comply with IP65 protection class. Advantages 1. DRG Series he...
- Call Support 0086-18515068813
- Email Support sales@convistafc.com