A Safe, Energy-Saving and Environmentally Friendly Flow Control Solution Expert

JOINTS

  • WTX type flexible rubber bent

    WTX type flexible rubber bent

    Technical Conditions          Type Item WTX-Ⅰ WTX-Ⅱ WTX-Ⅲ Working Pressure MPa (Kg f/cm2) 1.0 (10) 1.6 (16) 2.5 (25) Explosion Pressure MPa (Kg f/cm2) 2.0 (20) 3.2 (32) 4.5 (45) Vacuum KPa (mmHg) 53.3 (400) 86.7 (650) 100 (750) Applicable Temperature °C -15~115, (for special conditions) it can be -30~250 Applicable Medium Air, compressed air, water, sea water, hot water, oil, acid and alkali etc. Main joint dimension Nominal diameter Len...
  • Rubber (Fabric) Ducting Joints (Non-metallic Compensator)

    Rubber (Fabric) Ducting Joints (Non-metallic Compensator)

    Product features • It is reasonably structured with good flexibility and large range of expansion and contraction of compensating pipe, which has a small counterforce on the pipe support. • With vibration absorption and noise reduction, heat and dust insulation, it is friendly to the environment and helpful for simplifying the support structure. • It can deflect displacement and prevent the damage cause by the sinking of connected supporting frame or equipment foundation. It c...
  • JDX type reducing rubber joint (reducer)

    JDX type reducing rubber joint (reducer)

    Technical Conditions          Type Item JDX (DN50~300) JDX (DN350~600) Remarks Working Pressure MPa (Kg f/cm2) 1.0 (10) 0.6 (6) A. Like media oil and acid alkali materials. B. Special requirements for working temperature C. Write and provide drawing sample for order D. Make notes when ordering Explosion Pressure MPa (Kg f/cm2) 2.0 (20) 1.5 (15) Vacuum KPa (mmHg) 86.7 (650) 53.3 (400) Applicable Temperature °C -15~115, (for special conditions) it can -30~250 Appl...
  • JGD-D1 type rubber cutting vibration isolator

    JGD-D1 type rubber cutting vibration isolator

    Product introduction D1 type rubber cutting vibration isolator is composed of internal and external steel bushing and medial synthetic rubber, after vulcanization, it appears a core in the middle and the rubber part is stressed, and there are large deformation range and low free -running frequency. The working temperature ranges -5C~+50C, as the temperature changes, the rigidity changes; damping ratio is C/CC>0.07. It has good vibration isolating effect for the active vibra...
  • JGD-D type rubber vibration isolator
  • JGD-B1 type fan coil rubber joint

    JGD-B1 type fan coil rubber joint

    Product introduction This product is composed of inner rubber, rubber hose made up multi-layer coating cord fabric and outer rubber and metallic active joint with advantage features of high pressure resistance, good flexibility, large deflection displacement, ageing resistance and good vibration absorption, it is applied to the inlet and outlet pipe connection of the variable fan-coil unit used in air conditioner of hotels. Materials No Name 1 Inner glue ...
  • JDG-B Type Screwed Connection Rubber Joint

    JDG-B Type Screwed Connection Rubber Joint

    Materials No Name Material 1 Outer/inner rubber NR, NBR, EPDM 2 Key frame Nylon cord fabric 3 Pressurized ring Steel wire 4 Thread woggle joint Forged cast iron Technical Conditions Working pressure 1.6MPa (16Kgf/cm2) Angular deflection (a1+a2) 45° Explosion pressure 4.8MPa (48Kgf/cm2) Vacuum 53.3KPa (400mmHg) Applicable Temperature ℃ -15℃~115℃, (for special conditions) it can be -30℃~250℃ Applicable media Water, sea water, hot water, air...
  • VSSJA-2(B2F) Type Double Flange Limited Telescopic Joint

    VSSJA-2(B2F) Type Double Flange Limited Telescopic Joint

    Products design features The main budy of the product is made of high-quality materials, high hardness, easy to use, and quick to install. Has good corrosion resistance, oil resistance, acid and alkali resistance. The product structure design is reasonable.The sealing performance is reliable. No welding is required.Easy to load and unload, it can compensate for the displacement, misalignment and bending of the pipeline within a certain range. Its working principle is after bei...
  • Flexible Rubber Joint

    Flexible Rubber Joint

    Performance characteristics Flexible rubber joint, which is also called vibration absorber, pipe vibration absorber, flexible joint and hose joint and so on, is pipe joint with high flexibility, high air tightness and good medium-resistance and weather resistance. Its performance characteristics are: 1. It is small in size, light in weight, good in flexibility, convenient for installation and maintenance. 2. During installation, transverse, axial and angular displacement will ...