A Safe, Energy-Saving and Environmentally Friendly Flow Control Solution Expert

Water System Valves

  • Plunger valve, Piston type flow control valve

    Plunger valve, Piston type flow control valve

    Product characteristics and benefits • Low actuating torque due to pressure balanced valve piston • Contril valve in straightway type • With customized control device depending on operating conditions • Rotationally symmetrical flow guidance • Annular flow cross section in each position • Axial movement of the plunger by means of crank gear mechanism • With self-locking worm gear unit including position indicator • Elastic profile sealing ring located in the no-flow zone for h...
  • 1318 Pressure Reducing Valve

    1318 Pressure Reducing Valve

    Specifications Reducing valve: reduces a higher inlet pressure to a lower outlet pressure. Constant outlet pressure over wide flow range. Pilot-operated main valve not subject to pressure fall off. Outlet pressure is adjustable with singe screw. Can be maintained without removal from the pipe line. Adjustable opening / response speed. Stabilized regulation at near-zero flow. Flanged and drilling complies with EN1092-2 PN10/16; ANSIB16.1 Class125. Grooved end complies with AWWA...
  • 2108 AWWA C504 C516 Double Eccentric Butterfly Valve

    2108 AWWA C504 C516 Double Eccentric Butterfly Valve

    Our well-equipped facilities and exceptional top quality management throughout all stages of generation enables us to guarantee total buyer gratification for 2108 AWWA C504 C516 Double Eccentric Butterfly Valve, All products come with good quality and perfect after-sales services. Market-oriented and customer-oriented are what we have been being after. Sincerely look forward to Win-Win cooperation ! Our well-equipped facilities and exceptional top quality management throughout all stages of g...
  • GD1 GD2 BS5163 AWWA C515 NRS Resilient Seated Gate Valve with Extension Spindle

    GD1 GD2 BS5163 AWWA C515 NRS Resilient Seated Gate Valve with Extension Spindle

    Specifications GD1: 150≤H1≤1000, GD2: H1≥1000. The distance from the center line of the valve to the ground shall be provided by the customer. When providing the data, please be sure that the error must not exceed ±20mm. Equipped with T-wrench: 10 sets of same size gate valves are equipped with one T-wrench. Customers need to purchase this wrench if they need more. This direct buried gate valve is equipped with BS 5163 resilient seated gate valve or FM/UL NRS resilient seated ...
  • 9709 Double Orifice Air Relief Valve

    9709 Double Orifice Air Relief Valve

    Specifications Provides the functions of both Air Release and Air / Vacuum Valves. Exhausts large quantities of air at system start-up. Provides protection from pipeline collapse due to vacuum. Vent the accumulated small volumes of air during normal system operation. NPT or Metric thread of inlet. Working Pressure and Temperature 16bar rated at -10°C to 120°C. Corrosion Protection   Fusion bonded coating or liquid epoxy painted interior and exterior. Material Specifications Bo...
  • 9708 Single Orifice Air Relief Valve

    9708 Single Orifice Air Relief Valve

    Specifications Provides the functions of both Air Release and Air / Vacuum Valves. Exhausts large quantities of air at system start-up. Provides protection from pipeline collapse due to vacuum. Incorporates both features within one calve, more compact and economical. NPT or Metric thread of inlet. Working Pressure and Temperature 16bar rated at -10°C to 120°C. Corrosion Protection Fusion bonded coating or liquid epoxy painted interior and exteri...
  • 9701 Automatic Air Vent Valve

    9701 Automatic Air Vent Valve

    Specifications Small orifice of 1/16 in. (1.6mm) to release air under pressure during normal pipeline operation. The float is connected to the vent via a linkage mechanism which is capable of operating the vent under full pipeline pressure. NPT or Metric thread of inlet. WRAS approved. Working Pressure and Temperature 16bar rated at -10°C to 120°C. Corrosion Protection Fusion bonded coating or liquid epoxy painted interior and exterior. ...
  • 9208 Automatic Air Valve

    9208 Automatic Air Valve

    Specifications The 9208 is a high-performance automatic air valve. The resilient seat offers a 100% reliable seal. The single chamber design offers better performance than double chamber designs. The intake and exhaust speed can reach the speed of sound. The design is lugged simple of corrosion resistant stainless steel. EPDM sealing ring. Flanged and drilling complies with EN 1092-2 PN16 (Other types are available on request). Outlet female thread acc. To DIN ISO 228. ...
  • 9110 Combination Air Valve for Sewage

    9110 Combination Air Valve for Sewage

    Specifications Single chamber double orifice triple function air and vacuum automatic release valve. Designed to operate with liquids carrying solid particles such as sewage and effluent. Release air during charging of the system and intake air during draining of the system. Complete separation of the liquid from the sealing mechanism provide optimum work conditions. All inner metal parts made of stainless steel. Flanged and drilling complies with EN1092-2 PN16 (Other types ar...
  • 9101A Double Orifice Air Relief Valve

    9101A Double Orifice Air Relief Valve

    Specifications Dual air release vent the accumulated small volumes of air during normal system operation. Allow inflow of large volumes of air during draining of the pipeline. Allow venting of large volumes of air during filling of the pipeline. Provide protection from pipeline collapse due to vacuum. Flange and drilling comply with EN 1092-2 PN16 (Other types are available on request). Working Pressure and Temperature 16bar rated at -10°C to 120°C. C...
  • 9100 Single Orifice Air Relief Valve

    9100 Single Orifice Air Relief Valve

    Specifications Provides the functions of both Air Release and Air I Vacuum Valves. Exhausts large quantities of air at system start-up. Provides protection from pipeline collapse due to vacuum. Incorporates both features within one valve, More compact and economical. Flange and drilling to EN1092-2 PN10/16; ANSI B16.1 Class125. Working Pressure and Temperature 16bar rated at -10°C to 120°C. Corrosion Protection Fusion bonded coating or liquid ep...
  • 6125 DIN3356 Globe Valve

    6125 DIN3356 Globe Valve

    Specifications Valves comply with DIN3356. Metal Seat. Adjustable stem seal. Packing replaceable under pressure. Available with flanges EN1092-2 2 PN10 or PN16, ANSI B16.1 Class 125. (Other types available on request) Face to face length in accordance with DIN3202 series F1. Working Pressure and Temperature 16bar rated at -10°C to 120°C. Corrosion Protection Internally and externally liquid epoxy painted.. Material Specifications Body  grey cast iron Bonnet  grey cast iron Trim...
12345 Next > >> Page 1 / 5