-
Hot Selling for Directional Control Valve - SY Series Drain Valve – Convista
Performance Parameters Nominal Diameter 3/4 “~4” Nominal pressure ANSI 150LB-4500LB Body type Y pattern of 45-degree angle Body material A105, F22, F91, F92, F316H Bonnet standard, cooling structure Trim integral stellate seat Packing Flexible graphite with stainless steel wire Flow characteristics quick opening Two kinds of actuators are optional pneumatic diaphragm actuator (pneumatic multi-spring and single-spring diaphragm actuator are optiona... -
2020 New Style Flow Control Valve Hydraulic - Dual-lever safety valve – Convista
Specifications GA44H-16C, GA44H-25C, GA44H-40C, GA44H-64C GA44H type safety valve is applicable to the power-station boiler and pressure container (The working temperature is 450°C or less.) which will avoid the pressure rate beyond the allowed upper limit. The medium can be steam or air. Explanation of the materials for main parts For the materials of main parts GA44H lever safety valve is just same as GA42H- 16C/25/40 lever safety valve. -
Massive Selection for Filling Valve - 2502 Lug Butterfly Valve – Convista
Specifications Meet or exceed the requirements of EN593, AS4795.1 and MSS SP-67. Replaceable liner for DN300 and below sizes, Vulcanized liner for DN350 and above size. 2 shafts for DN300 and below sizes and 1 shaft for DN350 and above size. Mounting flange in accordance with ISO 5211 or MSS SP-102. Connection flanged ends: PN10/16, Class 125 and Table D/E. WRAS approved. Options SS304 / 316 stainless steel shaft. GX5CrNiMo19-11-2 (1.4408) disc for #2502. Gear operator or handle operated.... -
Hot Selling for Flange Check Valve - Plunger valve, Piston type flow control valve – Convista
Product characteristics and benefits • Low actuating torque due to pressure balanced valve piston • Contril valve in straightway type • With customized control device depending on operating conditions • Rotationally symmetrical flow guidance • Annular flow cross section in each position • Axial movement of the plunger by means of crank gear mechanism • With self-locking worm gear unit including position indicator • Elastic profile sealing ring located in the no-flow zone for h... -
Special Design for Back-Flow Safety Valve - 3114 AWWA C500 Metal Seated Gate Valve – Convista
Specification Comply with AWWA C500. Adjustable stem seal. Available with handwheel, gearbox or actuator. Flange and drilling comply with ASTM B16.1 Class125. Face to face dimensions in accordance with: EN 558-1 basic series 3, ASME B16.10. Working Pressure and Temperature 150psi/200psi/250PSl rated at -10°C to 120 °C. Working Pressure and Temperature Flange and drilling comply with EN1092-2 PN16. ASTM A276 Grade 304 stem. Stainless steel... -
Well-designed Y-Pattern Glove Valve - 3226 AWWA C509 NRS Resilient Seated Gate Valve – Convista
Detail Meet or exceed the requirements of AWWA C509 standard. Triple O-Ring stem seal. With two bearings above and below the stem collar to reduce friction. Can be installed in horizontal or vertical position. Face to face dimension complies with ASME B16.10. Flange and drilling comply with ASTM B16.1 Class 125. Working Pressure and Temperature 150psi rated at -10°C to 120°C. Options Available with 200psi/250/psi. ASTM A276 Grade 316 stem. Stain... -
100% Original Ky Long Shaft Submerged Pump - CH Standard Chemical Process Pump – Convista
Overview CH pump, a horizontal single-stage single-suction cantilever centrifugal pump, is a high-efficiency pump that integrates advantages of a large number of chemical engineering pumps in accordance with the Technical Specifications for Centrifugal Pumps (Class II) GB/T 5656-2008 (equal to ISO5199: 2002). It comprises four models as follows in order to meet the operation requirements: CH model (closed impeller and mechanical sealing) CHO model (semi-open impeller and mecha... -
Factory Supply Ksp Chemical Mixed Flow Pump - THA Axial Flow Pump – Convista
Specifications Performance Scope Flow: Q≤25000m3/h Head: H≤7m Pipe diameter: DN=250-1500mm Operating pressure: P≤0.6Mpa Operating temperature: T=-30~+250℃ KSP series chemical mixed – flow pump is horizontal radial division, cantilever mixed – flow pump, pump body by the foot support. With safe and reliable, stable operation, easy maintenance and other characteristics. It is mainly conveying large flow, low head, uniform or contain certain particles of chemical neutral o... -
Quality Inspection for Fully Welded Ball Valve - Spring full bore type with lever safety valve – Convista
Specifications A28H-10C, A28Y-10P, A28Y-16P, A28Y-25P, A28Y- 40P A28Y-16C, A28Y-16R, A28Y-25R, A28Y-40R A28H type are used for the equipment and pipeline of the air,N2,H2 mixed gas vapor etc. medium what the working temperature are less than 200℃.A28Y-P/10R8 type are used for the equipment and pipeline of the quality with corrode medium what the working temperature are less than 200℃.Take for extra pressure protection devices. -
New Fashion Design for Water Valve - 3914 OS&Y Metal Seated Gate Valve – Convista
Specifications Valves Comply with EN1171, MSS SP-70. Outside stem screw. Adjustable stem seal. Packing replaceable under pressure. Handwheel operated. Groove-Metric or AWWA C606 standard. Face to face dimensions in accordance with EN558-1 basic series3 and ASME B16.10. Options Metal seat: Bronze or Stainless Steel. SS304 stainless steel stem. Stainless steel fasteners: A2-70 or A4-70. Material Specifications Body ductile iron Bonnet ducti... -
Competitive Price for Liquefied Petroleum Gas, Back-Flow Safety Valve - Vacuum negative- pressure safety valve – Convista
Specifications A72W-10P, A72W-10R A72W is applicable in negative pressure system with temperature≤200℃. When the negative pressure in the container exceeds the allowed value, the valve will open automatically and absorbs air. When the negative pressure in the container reaches the allowed value, the valve will close automatically so as to protect the equipment and the system. It is to be installed in normal non-negative pressure systems. When the discharge valve of the contain... -
China Factory for Pressure Control Valve - 3226 AWWA C509 NRS Resilient Seated Gate Valve – Convista
Detail Meet or exceed the requirements of AWWA C509 standard. Triple O-Ring stem seal. With two bearings above and below the stem collar to reduce friction. Can be installed in horizontal or vertical position. Face to face dimension complies with ASME B16.10. Flange and drilling comply with ASTM B16.1 Class 125. Working Pressure and Temperature 150psi rated at -10°C to 120°C. Options Available with 200psi/250/psi. ASTM A276 Grade 316 stem. Stain...
- Call Support 0086-18515068813
- Email Support sales@convistafc.com