-
Original Factory Awwa Water System Valve - 5106 Globe Silent Check Valve – Convista
Specifications Complies with requirements of EN 16767. The design is for liquid service and offers many obvious advantages when compared with conventional swing check valve. Spring automatically closes disc at zero flow before flow reversal occurs. This prevents surge and water hammer. Completely guided disc both top and bottom. Perfect tightness soft sealed even at low differential pressure. Flanged and drilling complies with EN1092-2 PN10/16; ANSI B 16.1 Class125. WRAS appro... -
2020 wholesale price Awwa C504 C516 Double Eccentric Butterfly Valve - Inner assemble safety valve – Convista
Specifications ANA42F ANA42F inner assemble safety valve is to be applied to liquefied gas tank lorry in railroad and automobile or ground liquefied gas tank, to provide over pressure protection. -
High reputation Ss Lug Butterfly Valve - Closed spring-loaded low lift type safety valve – Convista
Specifications A41H-16C, A41H-25C, A41H-40C, A41Y-64C, A41Y-100C, KA41H-16P A41Y-16P, A41Y-25P, A41Y- 40P, A41Y-64P, A41Y-100P, KA41Y-25P A41Y-16R, A41Y-25R, A41Y-40R, A41Y-64R, A41Y-100R, KA41Y-40R A41H type are used for the equipment and pipeline of the petroleum gas, air water etc. medium what the working temperature are less than 300°C.A41Y-P/R type are used for the equipment and pipeline of the quality with corrode medium what the working temperature are less than200°C.Ta... -
High definition Balance Valve - 7109 Suction Diffuser – Convista
Specifications Pump protection fitting, Providing in one single compact unit a reducing elbow. A protective strainer and a flow straightener to improve pump performances. Removable 20 mesh start up screen for added protection during system start up. Oversized diffuser screen. Creates a uniform flow to the pump. Angled body pattern also designed for reducing pipe size to the pump. Drain plug for easy routine cleaning. Fully epoxy coated with stainless steel screen for long-las... -
Manufactur standard Ss Double Orifice Air Relief Valve - Floating Ball Valve – Convista
Detail l Type l EFB Type l Design Specification l API 6D, API 608, BS 5351, GB 12237 l Nominal Diameter l DN15~DN200 (NPS 1/2″~NPS 8″) l Pressure Rating l PN1.6MPa~PN6 3MPa (Class150~Class300) l Actuator l Manual Operated, Electrical Actuator etc Floating Ball Valve, is a basic product of Dipper Valve, it is used as shutoff valve in the pipeline, with good appearance, reliable sealing, small flow resistance, easy to open and close, long service l... -
Factory For Din Water System Valve - 5201 Swing Check Valve – Convista
Specifications Face to face dimension to DIN3202 F6 series. Globe shape to provide full flow with low pressure drop. Suitable for mounting in horizontal and vertical position. (With vertical flow upwards) Available with flanged to EN1092-2 PN10 or PN16. (Other flange types available on request) Options Ductile Iron construction for 25bar/30Opsi. Material Specifications Body cast iron Cover cast iron Disc cast iron Trim bronze -
China Cheap price Gate Valve - 1120 Foot Valve – Convista
Detail Designed for silent operation, positive seating and full flow area. Suitable for pressure up to 16 bar water service. Coated EPDM or NBR disc sealed ring. Screens are perforated 304 stainless steel with spot welded seam. Flanged and drilling complies with EN1092-2 PN16/25; ANSI B 16.1 Class125. Advantages Body grey cast iron Disc grey cast iron Seat CI integral -
Hot-selling Kmd Self-Balancing Multi-Stage Pump - KSP Chemical Mixed Flow Pump – Convista
Specifications Performance Scope Flow: Q=200~7000m3/h Head: H=3~30m Operating pressure: P≤0.6Mpa Operating temperature: T=-30~+250℃ KSP series chemical mixed – flow pump is horizontal radial division, cantilever mixed – flow pump, pump body by the foot support. With safe and reliable, stable operation, easy maintenance and other characteristics. It is mainly conveying large flow, low head, uniform or contain certain particles of chemical neutral or corrosive liquid... -
China Cheap price Temperature And Pressure Reducing Valve For Low Pressure Bypass - Pressure reducing valve for soot blowing reducing station – Convista
Detail Type Pressure Reducing Valve Model Y669Y-P58280V, Y669Y-3000SPL Nominal Diameter DN 80 It is used for soot blowing system of 600 to 1,000MW supercritical (ultra-supercritical) thermal power unit boiler. Advantages The valve body adopts angular forged steel structure with high strength and medium flow direction is flow opening type to meet strength requirements under high temperature and pressure. It has butt welding with a pipe. The valve s... -
Best quality Chemical Pump - ZAZE Petro-chemical Process Pump-1 – Convista
Overview We, in accordance with the design and manufacture standard of API61011th Centrifugal Pump for Petroleum, Petrochemical and Natural Gas Sectors, develop ZA/ZE series petro-chemical process pumps. Main pump body, according to the form of support, is divided into two structures: OH1 and OH2, and the impeller are of open and closed structures. Of which, ZA belong to OH1, closed impeller; and ZAO is of OH1, an open one; ZE is of OH2, with a closed one, and ZE0 is of OH2, w... -
Good Quality Filter - 7901 Grooved Ends Y-type Strainer – Convista
Specifications NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs. Screens are perforated 304 stainless steel with spot welded seam. Recessed seat in body assures accurate screen alignment. Groove dimensions comply with Metric or AWWA C606 standard. Working Pressure and Temperature 16 bar/250 psi rated at -10°C to 120°C. Corrosion Protection Fusion bonded coating or liquid epoxy painted interior and exterior. ... -
Renewable Design for Hard Sealing Butterfly Valve - High tmperaure and high pressure safety valve – Convista
Specifications A48Y-16C, A48Y-40, A48Y-64, A48sB-64, A48Y-100, A48sB-100, A48Y-160, A48sB-160 A48Y-16I, A48Y-40I, A48Y-64I, A48sB-64, A48Y-100I, A48sB-100I, A48sB-160I A48Y-16V, A48Y-40V, A48SH-40, A48Y-64V, A48sB-64V, A48Y-100V, A48sB-100V, A48TH-100, A48sB-160V These safety valves are used for the equipment and pipeline of the steam, etc. medium what the working temperature with C Type are less than 425C and I type are less than 500°C and V Type are less than 550C.Take for e...
- Call Support 0086-18515068813
- Email Support sales@convistafc.com