Low price for Pressure Relief Valve - 035-2302 Wafer Butterfly Valve – Convista
Low price for Pressure Relief Valve - 035-2302 Wafer Butterfly Valve – Convista Detail:
Meet or exceed the requirements of EN593, AS4795.1 and MSS SP-67.
Replaceable liner for DN300 and below sizes, vulcanized liner for DN350 and above sizes.
2 shafts for DN300 and below sizes and 1 shaft for DN350 and above sizes.
Mounting flange in accordance with ISO 5211 or MSS SP-102.
Connection flanged ends: PN10/16, Class 125 and Table D/E.
WRAS approved.
25bar available, Ductile Iron for 25bar/300psi, DN350 and larger size.
SS304/316 stainless steel shaft.
GX5CrNiMo19-11-2 (1.4408) Disc for#2302.
Gear operator or handle operated.
Built-in temper switch of gear operator.
With two switches.
| Part | Material | EN Specification | ASTM Specification |
| Body | Grey Cast Iron | EN1561, EN-GJL-250 | A126 Class B |
| Shaft | Stainless Steel | EN10088, X20Cr13 | A276, Grade 420 |
| Disc | Stainless Steel | EN10213, GX5CrNi19-10 | A351 CF8 |
| Bronze | EN1982, CC941K | B62 C83600 | |
| Ductile Iron | EN1563, EN-GJS-450-10 | A536 65-45-12 | |
| Liner | Rubber | EN681, EPDM or NBR | D2000 |
| Bushing | Plastic | Commercial, PTFE | Commercial, PTFE |
| Shaft Sealing | O-Ring | EN681, BUNA-N | D2000 NBR |
|
Size |
DN50 |
DN65 |
DN80 |
DN100 |
DN125 |
DN150 |
DN200 |
DN250 |
DN300 |
DN350 |
DN400 |
DN450 |
DN500 |
DN600 |
|
A |
160 |
175 |
180 |
200 |
215 |
225 |
240 |
295 |
335 |
370 |
400 |
425 |
480 |
565 |
|
B |
80 |
90 |
95 |
115 |
135 |
140 |
175 |
200 |
235 |
290 |
315 |
340 |
390 |
450 |
|
E |
43 |
46 |
46 |
52 |
56 |
56 |
60 |
68 |
78 |
78 |
88 |
109 |
127 |
154 |
|
Shaft Top Section |
11×11 |
14×14 |
17×17 |
22×22 |
27×27 |
Dia.48 |
||||||||
Product detail pictures:

Related Product Guide:
Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Low price for Pressure Relief Valve - 035-2302 Wafer Butterfly Valve – Convista, The product will supply to all over the world, such as: Maldives, Bangalore, Botswana, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.





