A Safe, Energy-Saving and Environmentally Friendly Flow Control Solution Expert

All Products

  • JGD-D1 type rubber cutting vibration isolator

    JGD-D1 type rubber cutting vibration isolator

    Product introduction D1 type rubber cutting vibration isolator is composed of internal and external steel bushing and medial synthetic rubber, after vulcanization, it appears a core in the middle and the rubber part is stressed, and there are large deformation range and low free -running frequency. The working temperature ranges -5C~+50C, as the temperature changes, the rigidity changes; damping ratio is C/CC>0.07. It has good vibration isolating effect for the active vibra...
  • JGD-D type rubber vibration isolator
  • JGD-B1 type fan coil rubber joint

    JGD-B1 type fan coil rubber joint

    Product introduction This product is composed of inner rubber, rubber hose made up multi-layer coating cord fabric and outer rubber and metallic active joint with advantage features of high pressure resistance, good flexibility, large deflection displacement, ageing resistance and good vibration absorption, it is applied to the inlet and outlet pipe connection of the variable fan-coil unit used in air conditioner of hotels. Materials No Name 1 Inner glue ...
  • JDG-B Type Screwed Connection Rubber Joint

    JDG-B Type Screwed Connection Rubber Joint

    Materials No Name Material 1 Outer/inner rubber NR, NBR, EPDM 2 Key frame Nylon cord fabric 3 Pressurized ring Steel wire 4 Thread woggle joint Forged cast iron Technical Conditions Working pressure 1.6MPa (16Kgf/cm2) Angular deflection (a1+a2) 45° Explosion pressure 4.8MPa (48Kgf/cm2) Vacuum 53.3KPa (400mmHg) Applicable Temperature ℃ -15℃~115℃, (for special conditions) it can be -30℃~250℃ Applicable media Water, sea water, hot water, air...
  • Plunger valve, Piston type flow control valve

    Plunger valve, Piston type flow control valve

    Product characteristics and benefits • Low actuating torque due to pressure balanced valve piston • Contril valve in straightway type • With customized control device depending on operating conditions • Rotationally symmetrical flow guidance • Annular flow cross section in each position • Axial movement of the plunger by means of crank gear mechanism • With self-locking worm gear unit including position indicator • Elastic profile sealing ring located in the no-flow zone for h...
  • ZHD Series (Electric or Pneumatic) Minimum Flow Control Valve

    ZHD Series (Electric or Pneumatic) Minimum Flow Control Valve

    Profile ZHD multistage cage control valve used multilevel cage symmetric sleeve contol valve. It complete control medium velocitywithin valve, and greatly reduced noise made by high pressure gas or steam within valve, stabile multistage pressure reducing reducing effective prevent liquid cavitation, so it’s the stable control valve used in high-pressure medium performance, customers can also select multi-spring disphragm mechanism or pneumatic actuators, etc. T...
  • ZDM Series Automatic recirculation control valve

    ZDM Series Automatic recirculation control valve

    Profile ZDM series Automatic recirculation valve is a kind of pump protection device. It automatic protects centrifugal pump when pump body occur cavitation damageor unstable (especially conveying hot water at low load operation). Once pump flow is lower than the preseted flow, bypass can completely open to ensure the minimum required flow pump. Even running fully closed, namely running flow is zero, the minimum flow can also pass bypass for Automatic recirculation. Pressure r...
  • ZDL Series Automatic recirculation control valve

    ZDL Series Automatic recirculation control valve

    Profile ZDL series Auromatic recirculation valve is a kind of pump prtectiong device. It automatic protects centrifugal pump when pump body occur cavitation damage or unstable (especially conveying hot water at low load operation). Once pump flow is lower than the preseted flow, bypass can completely open to ensure the minimum required flow pump. Even running fully closed, namely running flow is zero, the minimum flow can also pass bypass for Automatic recirculation. Pressure ...
  • ZDT Model Automatic recirculation control valve

    ZDT Model Automatic recirculation control valve

    Profile ZDT series Automstic recirculation valve is a kind of pump protection device. It automatic protect centrifugal pump when pump body occur cavitation damage or unstable (especially conveying hot water at low load operation). Once pump flow is lower than the preseted flow, bypass can completely open to ensure the minimum required flow pump. Even running fully closed, namely main flow is zero, the minimum flow can also discharge from the bypass. ZDT series has big bypass, ...
  • SYGL type handle shake filter

    SYGL type handle shake filter

    Detail This product used for water supply system and industrial cooling water or boiler water circle, specially under continue operation, if found there is pressure difference feedback from two pressure meter, shake handle many circles, then can exclude pollution when open drain valve, it’s no need dismantle any parts. 1.Working pressure:1.6MPa 2.Medium: water 3.Shell: cast steel 4. Filter screen:304 Size L H 50 240 160 65 270 180 80 300 200 100 350 230 125 3...
  • SRBA (SRB) type filter

    SRBA (SRB) type filter

    Product introduction Basked type filter used in pipeline for oil or anther liquid medium, to exclude sundries internal of pipe, the screen area of this filter is 2.5-3.3 times bigger than flow bore area, it’s far exceed Y type and T type filter’s screen area. Filtration precision is the best one among of filters. The screen construction is more advantage than another filters, and convenience for usage. Operating principle Some sundries will brought ...
  • VSSJA-2(B2F) Type Double Flange Limited Telescopic Joint

    VSSJA-2(B2F) Type Double Flange Limited Telescopic Joint

    Products design features The main budy of the product is made of high-quality materials, high hardness, easy to use, and quick to install. Has good corrosion resistance, oil resistance, acid and alkali resistance. The product structure design is reasonable.The sealing performance is reliable. No welding is required.Easy to load and unload, it can compensate for the displacement, misalignment and bending of the pipeline within a certain range. Its working principle is after bei...